Technical Parameter |
Product Name | 10 ports Gigabit Managed Industrial PoE Switch/Media converter |
Model | HR600M-AFG-82F-SFP,HR600M-ATG-82F-SFP |
Interface | 8x 10/100/1000M copper RJ-45 POE ports, 2x 1000M SFP port ,1 console |
Network Protocols | Support IEEE802.3,IEEE802.3u,IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.1d, IEEE802.1w |
L2 ( Layer 2 Switching ) |
Port management | Enable / disable port Speed, duplex, MTU settings, etc. Flow-control flow control setup Port information view, etc. Support port access direction, VLAN image To support the port speed limit, Support port isolation settings Unknown unicast, multicast, broadcast storm suppression |
|
|
|
Spanning Tree Protocol | Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s |
|
Link Aggregation | Support static manual aggregation, Support LACP dynamic convergence IEEE 802.3ad |
|
VLAN | Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) ; Support Port based VLAN and IEEE 802.1Q VLAN |
|
IGMP snooping | Support static add / delete,Support v1/2/3 dynamic multicast listener, supports 256 multicast groups |
|
GMRP | Supports GARP multicast registration protocol |
MAC | Support static add / delete MAC address learning limit Support dynamic aging time settings |
|
Extended function |
ACL | Based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number Support time-range time management |
QOS | Based on 802.1p (COS) classification Based on DSCP classification Based on the source IP, destination IP, port number classification Support SP, WRR, DRR scheduling strategy Support traffic speed limit CAR |
MPLS | MPLS supports static LSP Support VPN MPLS |
LLDP | Supports LLDP link discovery protocol |
802.1x | Support 802.1x port authentication (Radius, local) |
Prevent attack | DOS defense Support for CPU protection, limited to send CPU message rate ARP binding (IP, MAC, PORT binding) |
System management | User add / delete user User login, operation, status, event log Device reset, configuration save / restore, upgrade management, time setting, etc. |
Management function |
CLI | Support serial command line management |
TELNET | Support serial command line management |
SSH | Supports SSHv1/2 remote management |
SNMP | Support v1/2/3 ColdStart, WarmStart, LinkDown, LinkUp |
WEB | Supports two layers, three layers of view, etc. |
Other parameters |
Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) |
Fiber Media | Multi-mode: 1310nm, 2Km Single-mode: 1310nm, 20; 1550nm, 40/60/80Km ( Based on your SFP Module ) |
POE Specification | PoE Standard:Support both IEEE802.3af and IEEE802.3at Single PoE Port Power Output: Max.15.4 watts(IEEE802.3af),Max.30 watts(IEEE802.3at) PoE port Auto detect AF/AT devices PoE Port Output Voltage:DC48V Power Pin Assignment:12+,36- |
Performance Specification | Bandwidth: 24Gbps Packet Buffer Memory:4M Packet Forwarding Rate:1488000pps/port Address Table: 8K |
Forwarding Mode | Store-And-Forward |
LED Display | Fiber Run indicator: FX1,FX2 Power supply indicator: PWR POE ACT indicator: LED-Yellow 1000M LINK indicator: LED-Green |
Industry Standard | EMI: FCC Part 15, CISPR (EN55022) class A EMS: EN61000-4-2 (ESD) EN61000-4-4 (EFT) EN61000-4-5 (Surge) Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Power Supply | Input Voltage: 5-55v Type of input: 6 pins terminal block No-load consumption: MAX 10W @DC52V0.2A Full-load consumption: MAX 104W @DC52V2A(802.3af) Full-load consumption: MAX 130W @DC52V2.5A(802.3af+) Full-load consumption: MAX 240W @DC52V4.6A(802.3at) |
Mechanical Structure | Shell: IP40 protect grade, metal shell Installation: DIN-Rail or Wall mounts |
Certification | 3C,CE mark, commercial;FCC Part 15 Class B; VCCI Class B;EN 55022 (CISPR 22), Class B |
Dimension | 16.6cm*12cm*6cm,Net weight:0.8kg |
Warranty | 5 years |