Product Name | Layer 3 Managed 24+4 1000M&10G Industrial PoE Switch |
Model No. | HR600M-AFG-SWTG342408 HR600M-ATG-SWTG342408 |
Basic characteristics |
Fixed port | 24*10/100/1000 Self-adaptive POE ports,8 SFP Combo ports + 4 ports 10G SFP port , 1 console port |
Standard and Protocols | IPv4/IPv6, IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p |
Bandwidth | 128Gbps |
Forwarding rate | 96Mpps |
Processor | ARM® Cortex™-A9 |
Flash memory capacity | 8MB |
Memory Capacity | 256M |
MAC address table | 12K |
Queue buffer | 64MB |
IP protection grade | IP40 |
Remote upgrade | Support upgrade through the web version or the local version upgrade |
Dimension | Product size:444x360x44mm weight:2.86KG |
Power supply characteristics | AC110-240V- DC5V-48V |
Power | NO POE≤20W,POE≥360W(Af),POE≥500W(At) |
Indicator light | Power indicator,System indicator,POE,Link/Act |
Enviromental tem./humidity | -40-75℃ Operating,-45-85℃ store,0-90% No condensation |
1.L2 Software Features |
1.1 Port management | Enable/Disable port | |
Speed,duplex,MTU Setting | |
flow-control | |
Port information view | |
1.2 Port mirroring | Support port access direction, vlan mirror | Vlan mirroring only supports command line configuration |
1.3 Port speed limit | Support , speed limit by the chip | |
1.4 Port isolation | Support | |
1.5 Storm suppression | Supports unknown unicast, unknown multicast, broadcast storm suppression | |
1.6 Link aggregation | Supports static manual aggregation | |
Support LACP dynamic aggregation | |
1.7 VLAN | Access | |
Trunk | |
Hybrid | Replaced by trunk |
Supports VLAN assignment based on port, protocol, MAC | |
Support GVRP dynamic VLAN registration | Only supports command line configuration |
Voice VLAN | |
1.8 MAC | Support static add, delete | |
MAC address learning limit | |
Support for dynamic aging time settings | |
1.9 Spanning Tree | Support 802.1d (STP) | Also Support ERPS |
(Private agreement) |
Support 802.1w (RSTP) | |
Support 802.1s (MSTP) | |
1.10 IGMP-snooping | Support static add, delete | |
Supports v1 / 2/3 dynamic multicast listening | |
2.L3 Software and Routing Function |
2.1 Interface configuration | Support SVI | |
2.2 ARP | Support Static ARP | |
Support Set ARP Aging time | |
2.3 VRRP | Supports VRRP route backup | |
2.4 ND | Support IPv6_ND Configuration | |
2.5 Routing | Static Router | |
RIP(V1/V2) | |
OSPF(V2) | |
BGP | |
RIP/OSPF/BGP Support route authentication | |
RIP/OSPF/BGP Support route import, filter function | |
3.Extension |
2.1 ACL | Based on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number | |
Support time-range time period management | |
2.2 QOS | Based on 802.1p (COS) classification | |
Based on DSCP classification | |
Based on source IP, destination IP, port number classification | |
Support SP, WRR, DRR scheduling strategy | |
Support rate speed limit CAR | |
2.3 LLDP | Supports LLDP link discovery protocol | |
2.4 User setting | Add/Delete users | |
2.5 Log | User log in, operation, status, event log | |
2.6 Anti-attack | DOS Defense | |
Support CPU protection, limit the rate of sending cpu packets | |
ARP Bind(IP,MAC,PORT Bind) | |
2.7 Network diagnosis | Support ping,telnet,trace | |
2.8 System management | Device reset, configuration save / restore, upgrade management, time setting, and so on | |
4.Management Function |
3.1 CLI | Supports serial command line management | |
3.2 TELNET | Support telnet remote management | |
3.3 WEB | Support L2 | |
5.Others |
5.1 Support DHCP Snooping,DHCP Server,DHCP relay |
5.2 Support ring protection - this feature is “ERPS” above the list |
5.3 Support SNMPV1/V2C/V3 |