10/100/1000M gigabit fiber to rj45 converter sfp media converter 1 sfp 1 rj45 ethernet
Description
The HRUI Ethernet media converters are designed to transmit and receive 10/100 /1000Mbps data over single
mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, 100 Mbps ,1000MEthernet rate
without any adjustments. The optical interface operates at a 1000Mbps Ethernet rate. LED indicators are provided
for rapidly ascertaining equipment operating status.
Features
1. Plug and play, high performance, Low power consumption
2. Compliant with IEEE802.3, IEEE802.3u, IEEE8.3ab,IEEE802.3z
3. Complies with IEEE802.3 (10base-T) and IEEE802.3u (100base-TX/FX),IEEE 802.3z/AB
10/100/1000base-T 1000base-SX/LX standards
4. Electrical port supports Auto-Negotiation for 10 Mbps or 100 Mbps, full duplex or half duplex data.
5. Automatic MDI/MDI-X crossover
6. Distances up to: Depend on SFP
8. LC optical connectors.
9. DC powered
10.Status LED's for TX,FX link/ACT, POWER,100M,1000M to easily monitor network statu
Technical Parameter
Product Name | 10/100/1000M SFP port Fiber Media Converter |
Model | HR900WS-GE |
Standards | IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.1af DTE Power via MDI |
Wavelength | Single Mode: 1310nm,1550nm |
Port | One RJ45 port, One SFP port |
Network Media | 10base-T: Cat3,4,5 UTP(≤100 meter) 100base-TX: Cat5 or more UTP (≤100 meter) |
Forward Mode | Store and forward |
LED Indicator | PWR: Green Illuminated to indicate unit is operating under normal operation 100M Flashing: Data runing at 100M rate. 1000M Flashing: Data runing at 1000M rate. TX link/ACT: Green Illuminated indicates receiving link pulses from compliant copper device and flashes when data being sent / received FX link/ACT: Green Illuminated indicates receiving link pulses from compliant fiber device and flashes when data being sent / received TP/FDX: Lit when TP full-duplex mode is active. Off when TP half-duplex mode is active. Blinks when collision signal is present. |
Power Supply | DC5V2A |
Environmental requirements | Operating Temperature: 0°C~+70°C Storage Temperature: -45°C~+95°C Relative Humidity: 0~95% (non-condensing) |
Transmission Distance | Fiber: Single Mode,20km; UTP: Cat.5/6, 100m |
Diemension | 11cm*7cm*2.5cm |
Warranty | 2 years warranty |